Bounding the Inefficiency of the Reliability-Based Continuous Network Design Problem Under Cost Recovery

Networks and Spatial Economics - This study defines the price of anarchy for general reliability-based transport network design problems, which is an indicator of inefficiency that reveals how much...     

Studies on the Structure and Catalytic Properties for Heck Reaction of Troxerutin Supported Palladium Catalyst

Theoretical Foundations of Chemical Engineering - Troxerutin supported palladium (TXT-Pd) catalyst was prepared readily by using one-step synthetic method. As-fabricated TXT-Pd catalyst was...     

Characterisation of the microplasma spraying of biocompatible coating of titanium

This paper presents new results of studying the influence of parameters of microplasma spraying (MPS) of Ti wire on the structure and properties of Ti coatings. Based on the design of the experiment and the results of the SEM study, certain spraying modes were chosen to form the desired composition and structure of the Ti coating.  The dense sublayer (up to 300 µm thick) provides good adhesion to the substrate, and a porous top layer can accelerate the coated implant ingrowth with the bone.  This technology is developed for the manufacture of coated endoprosthesis implants.     

Effect of Bismuth on hydrogen storage properties of melt-spun LaNi4.7-x Al0.3Bix (x = 0.0, 0.1, 0.2, 0.3) ribbons

The LaNi₅ intermetallic compound is an AB5 type hydrogen storage alloy which exhibits low operating temperature, easy activation, low pressure and tolerance to impurities. In this study, LaNi_4.7-x Al_0.3Bi_x (x = 0.0, 0.1, 0.2, 0.3) alloys were produced by melt-spinning technique and the effects of Al and Bi additions on the microstructure, thermal and hydrogen storage properties of LaNi₅ were investigated. The results showed that substitution of Ni with Al led to a desired decrease in absorption/desorption plateau pressure and hysteresis without a decrease in hydrogen storage capacity. In contrast, Bi substitution with Ni increased the absorption/desorption plateau pressure, reduced the hydrogen capacity and increased pulverization resistance of the alloy due to the formation of BiLa and AlNi₃ intermetallic phases at the grain boundaries.     

Unusual Two-Step Assembly of a Minimalistic Dipeptide-Based Functional Hypergelator

Self-assembled peptide hydrogels represent the realization of peptide nanotechnology into biomedical products. There is a continuous quest to identify the simplest building blocks and optimize their critical gelation concentration (CGC). Herein, a minimalistic, de novo dipeptide, Fmoc-Lys(Fmoc)-Asp, as an hydrogelator with the lowest CGC ever reported, almost fourfold lower as compared to that of a large hexadecapeptide previously described, is reported. The dipeptide self-assembles through an unusual and unprecedented two-step process as elucidated by solid-state NMR and molecular dynamics simulation. The hydrogel is cytocompatible and supports 2D/3D cell growth. Conductive composite gels composed of Fmoc-Lys(Fmoc)-Asp and a conductive polymer exhibit excellent DNA binding. Fmoc-Lys(Fmoc)-Asp exhibits the lowest CGC and highest mechanical properties when compared to a library of dipeptide analogues, thus validating the uniqueness of the molecular design which confers useful properties for various potential applications.     

A small-scale silica gel-water adsorption system for domestic air conditioning and water heating by the recovery of solar energy

A small-scale silica gel-water adsorption system with modular adsorber, which utilizes solar energy to achieve the cogeneration of domestic air conditioning and water heating effect, is proposed and investigated in this paper. A heat recovery process between two adsorbers and a mass recovery process between two evaporators are adopted to improve the overall cooling and heating performance. First, the adsorption system is tested under different modes (different mass recovery, heat recovery, and cogeneration time) to determine the optimal operating conditions. Then, the cogeneration performance of domestic cooling and water heating effect is studied at different heat transfer fluid temperatures. The results show that the optimal time for cogeneration, mass recovery, and heat recovery are 600 s, 40 s, and 40 s, respectively. When the inlet temperature of hot water is around 85°C, the largest cooling power and heating power are 8.25 kW and 21.94 kW, respectively. Under the condition of cooling water temperature of 35°C, the obtained maximum COP_c, COP_h, and SCP of the system are 0.59, 1.39, and 184.5 W/kg, respectively.     

Investigation on the anti-reduction mechanism of Ti4+ in high dielectric constant system Ca0.9La0.067TiO3 by doping with Al2O3

Ca_0.9La_0.067TiO₃ (abbreviated as CLT) ceramics doped with different amount of Al₂O₃ were prepared via the solid state reaction method. The anti-reduction mechanism of Ti⁴⁺ in CLT ceramics was carefully investigated. X-ray diffraction (XRD) was used to analyze the phase composition and lattice structure. Meanwhile, the Rietveld method was taken to calculate the lattice parameters. X-ray photoelectron spectroscopy (XPS) was employed to study the valence variation of Ti ions in CLT ceramics without and with Al₂O₃. The results showed that Al³⁺ substituted for Ti⁴⁺ to form solid solution and the solid solubility limit of Al³⁺ is near 1.11 mol%. Furthermore, the reduction of Ti⁴⁺ in CLT ceramics was restrained by acceptor doping process and the Q × f values of CLT ceramics were improved significantly. The CLT ceramic doped with 1.11 mol% Al₂O₃ exhibited good microwave dielectric properties: ε_r = 141, Q × f = 6848 GHz, τ_f = 576 ppm/°C.     

THz Stimulated Emission from Simple Superlattice in Positive Differential Conductivity Region

Narrow band emissions at 2.6–2.8 THz are observed out of liquid helium cooled 1 mm disk chips prepared of a wafer with the very low n type doped weak barrier GaAs–GaAlAs superlattice of 1000 periods. The emissions are at about 8.0–18.0 V pulsed voltage applied to the chips in region of the chips positive DC differential conductivity that guaranties absence of inhomogeneous electric field domains in the chips. The emission frequency bands are estimated with a cyclotron resonance filter; the measurements show that the band width is of about that of the THz quantum cascade laser. By using long voltage pulses the chip heating above 100 K is achieved without substantial change in emission power. We speculate that the emission is super luminescence (amplification) of whispering gallery modes in the chips as a result of inverted Wannier-Stark level transitions under bias. The results are the first world demonstration of THz stimulated emission in a simple superlattice within region of positive DC differential conductivity; they give strong impetus for development of THz and higher frequency sources based on such simple superlattices; the sources should well compete with the THz quantum cascade lasers in particular at elevated temperatures.